你現在的位置:首頁>企業動態>

                              打膠設備的保養維護有哪些方式?

                              瀏覽:
                              隨著人們生活水平的發展,現在在我們國家對于建筑門窗節能的要求不斷地發展,給人們的生活質量帶來了很大的提高,讓人們能夠過上更好生活,不斷的有高科技出現,像是中空玻璃設備就是高科技之一,給整個的生產帶來了很大的幫助,但是對于打膠設備的維護和保養你知道嗎?不知道的話,下面中空玻璃設備為大家詳細的介紹一下這方面知識。
                              With the development of people's living standards, the requirements for building door and window energy conservation are constantly developing in our country, which has brought great improvement to people's quality of life and enabled people to live a better life. High technologies continue to appear. For example, insulating glass equipment is one of the high technologies, which has brought great help to the whole production. But do you know the z-best maintenance and repair of insulating glass production line? If you don't know, the following insulating glass equipment will introduce this knowledge in detail.
                              首先,人士介紹,在使用中空玻璃生產線的時候,大家一定得注意一下對傳動系統的維護,定期的去檢查一下,看看各個的傳送輥軸承、毛刷輥軸承等等是不是需要添加加鈣基潤滑脂,另外提醒一些的操作者,在操作的時候,大家得注意,對于減速機需要美半年就得更換一次。
                              First of all, according to the person, when using the insulating glass production line, you must pay attention to the maintenance of the transmission system and check it regularly to see whether the transmission roller bearings and brush roller bearings need to be added with calcium based grease. In addition, remind some operators that during operation, you must pay attention to that the reducer needs to be replaced every six months.
                              其次,對于中空玻璃生產線的整個過程當中,二段是清洗段,這個地方是需要使用水循環來進行使用的,這時候,要注意一下看看水箱是不是有水,要是有的話,還得保障一下清水的質量等等,因為水質量不好的話,就會影響到Z后玻璃表面的清潔程度。
                              Secondly, in the whole process of the insulating glass production line, the second section is the cleaning section, which needs to be used by water circulation. At this time, pay attention to whether there is water in the water tank. If so, you have to ensure the quality of clean water, etc., because if the water quality is poor, it will affect the cleanliness of the glass surface after Z.
                              另外,中空玻璃生產線的風路系統也是需要進行維護的地方,操作的人員一定得定期的檢查一下,看看是不是有毛病,如果有故障出現的話,就要馬上的停止下來進行檢查,修理好之后在工作。
                              In addition, the air path system of the insulating glass production line also needs to be maintained. The operators must check regularly to see if there is a problem. If there is a fault, they should stop immediately for inspection and work after repair.
                              中空玻璃設備指的是用來生產、加工中空玻璃的機械設備。中空玻璃設備在使用的過程中會不斷發生磨損,根據磨損產生的原因可以分為使用磨損和自然磨損兩類。
                              Insulating glass equipment refers to the mechanical equipment used to produce and process insulating glass. Insulating glass equipment will be worn continuously in the process of use. According to the causes of wear, it can be divided into use wear and natural wear.
                              中空玻璃設備在運行過程中,由于機器的運轉產生摩擦、振動,導致機器部件出現不同程度的磨損。這種磨損即稱為使用磨損。使用磨損會造成機器部件損壞,機器運轉失靈,導致工作性能下降。嚴重的還會導致事故發生。影響使用磨損發展程度的主要因素有:設備的質量、負荷程度、操作工人的技術水平、工作環境、維修質量與周期等。
                              During the operation of insulating glass equipment, due to the friction and vibration caused by the operation of the machine, the parts of the machine are worn to varying degrees. This kind of wear is called service wear. Wear and tear will cause damage to machine parts, failure of machine operation and decline of working performance. Serious will also lead to accidents. The main factors affecting the development degree of service wear are: equipment quality, load degree, technical level of operators, working environment, maintenance quality and cycle, etc.
                              在中空設備壽命期內,由于自然力量的作用或因保管不善而造成的銹蝕、老化、腐朽,甚至引起工作精度和工作能力的喪失,即稱為自然磨損。機器在閑狀態下中容易失去正常的維護,因此設備閑置中的自然磨損比使用中更明顯。
                              During the service life of hollow equipment, the corrosion, aging and decay caused by the action of natural forces or improper storage, and even the loss of working accuracy and working ability are called natural wear. The machine is easy to lose normal maintenance in idle state, so the natural wear of the equipment in idle state is more obvious than that in use.
                              不管是使用磨損還是自然磨損,都會對機器的使用和運行產生很大的影響。因此,在日常的生產中做好機器的保養。按時檢查機器部件,定期對機器進行擦洗,延長機器的使用壽命。
                              Whether using wear or natural wear, it will have a great impact on the use and operation of the machine. Therefore, maintain the machine in daily production. Check the machine parts on time and scrub the machine regularly to prolong the service life of the machine.

                              上一篇:中空玻璃打膠機比傳統手工打膠有這么多好處
                              下一篇:最后一頁

                              • 官方微信
                              2021精品久久久久精品网站
                                                          <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>