你現在的位置:首頁>企業動態>

                              中空玻璃打膠機比傳統手工打膠有這么多好處

                              瀏覽:
                              在使用的時候一般按照膠水的性能能夠劃分為單組份中空玻璃打膠機和雙組份中空玻璃打膠機,我們先來說說看單租份打膠機,這一種打膠機是比較簡單的一種設備,使用的過程中相對簡單,只需要使用一個壓盤將膠水抽出來到一定的分量然后打進產品里面就可以了。   還有一種是雙組份打膠機,這個原理和我們知道的雙液點膠機是差不多的,在進行工作的時候可以按照客戶的要求量身定制壓盤,壓盤需要兩個,然后將已經準備好的膠桶放在兩個定制的壓盤下面,而且經過壓盤壓膠以后在使用定量泵進行配比和混合,全部完成了以后在將膠打入到產品里面。
                              When using, it can generally be divided into single component insulating glass gluing machine and two-component insulating glass gluing machine according to the performance of glue. Let's talk about single rent gluing machine first. This kind of gluing machine is a relatively simple equipment. The process of use is relatively simple. You only need to use a pressure plate to draw out the glue to a certain amount and then put it into the product. There is also a two-component glue dispenser. This principle is similar to that of the two-liquid dispensing machine we know. When working, the pressure plate can be customized according to the requirements of the customer. The pressure plate needs two, and then the prepared rubber bucket is placed under the two customized pressure plates. After the pressure plate is pressed, the quantitative pump is used for proportioning and mixing. After all is completed, the glue is injected into the product.
                              現在在市場上面的中空玻璃打膠機一般都是采用多的活塞式撒嬌的方式,因為活塞式打膠的話是有一個抽膠的過程的,但是也經常會因為操作的不準確性導致中空玻璃打膠機打膠的線條變得不均勻,容易出現忽大忽小的狀態,所以經過了發展和研究以后,中空玻璃打膠機已經能夠連續打膠了,而且操作也是了很多,而且打膠的線條也變得比較均勻了,基本上不會在出現忽大忽小的情況了,而且在進行配比的時候要按照使用的情況來進行配比,另外在操作的時候也少不了手持式打膠搶的幫助,也可以使用人工去操作。
                              At present, the insulating glass gluing machine on the market generally adopts a multi piston coquettish way, because the piston gluing is a glue pumping process, but it often leads to uneven gluing lines of the insulating glass gluing machine due to inaccurate operation, which is easy to be in a state of big and small. Therefore, after development and research, the insulating glass gluing machine has been able to apply glue continuously, Moreover, there are a lot of operations, and the lines of gluing have become more uniform. Basically, there will be no big and small situations, and the ratio should be carried out according to the use situation. In addition, the help of hand-held gluing grab is indispensable during operation, and manual operation can also be used.
                              以上就是為大家介紹的有關雙組份打膠機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.lookmei.com
                              The above is a detailed introduction to the two-component gluing machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.lookmei.com

                              上一篇:中空玻璃生產設備的選擇
                              下一篇:最后一頁

                              • 官方微信
                              2021精品久久久久精品网站
                                                          <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>